Coupler Joiner
Coupler Joiner
 |
No items matching your keywords were found.
|
|
RJ45 Coupler F-F Straight $0.01 "Make a network extension cord out of two 10Base-T Cat 5 network patch cables with an RJ-45 coupler. Both jacks accept one RJ-45 plug, allowing you to plug an Ethernet cable into both sides."... |
|
|
Fangriver Cat5 Rj45 Network Cable Extender Plug Coupler Joiner $0.01 ... |
|
|
Coaxial Adapter, F Female / F Male, Right Angle $0.01 This series of T and right angle coaxial adapters offers users an economical way to solve orientation and space problems when interconnecting coaxial cabling and equipment. This series addresses most of the popular 50 and 75 Ohm interfaces such as SMA, BNC, Type F and Type N as well as many others.... |
|
|
Female to Female Gold RCA Coupler Joiner Adapter Pack of 10 $1.63 ... |
|
|
Bars, Couplers, & Joiners ... |
|
|
Metra 40-UV41 Motorola Female To Female Antenna Adapter $3.00 Metra Motorola Female to Female Antenna Cable 40-UV41 Antenna Cables... |
|
|
ACDelco 15714661 Parking Brake Cable Connector $6.96 ... |
|
|
Vibrant 12052 Aluminum Joiner Coupler 2.5 OD x 3 L $8.99 Vibrant #12052 Air Intake Tube Coupler, Joiner, Aluminum, Natural, 2.5 in. OD, 3 in. Length, Each. V32-12052 Description:These Vibrant aluminum air intake couplers are made from aluminum and feature beaded ends for a more secure clamped seal.... |
I have a plastic hose that carries antifreeze that is split...do they make a joiner (picture)?
I have a split in a plastic hose and it's very difficult to replace because the space is very tight and the hoses it is connected to are stuck on from heat/age. Here is a picture of the split, it is a clean right through:
http://img22.imageshack.us/img22/7727/carhose.jpg
Here is a pic in paint of what it looks like:
http://img710.imageshack.us/img710/4296/carhose2.png
It looks to be about 3/4" in diameter. I've tried some plastic putty stuff to try and seal it together that way...didn't work. Do they make a coupler or something?
I can't get the tube off really...it's going to be a nightmare...
looks like a generic bypass tube where someone bypassed the heater core.Take the old one off and take it to the parts store,they can match it up for you
do the hoses too or just cut em off and see if you get that same part but longer but the hoses really need to go too